Processing-structure-property-performance (PSPP) of Materials

RECENT NEWS

Registration & Accomodation – Materials Under Extreme Loading and Harsh Environments Workshop 2024

Abstract Submission Now Open – Materials Under Extreme Loading and Harsh Environments Workshop 2024

Materials Under Extreme Loading and Harsh Environments Workshop 2024

 View all

Publications

  1. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom, (2023) Assessing the Mechanical Response of an Additively Manufactured CoCrFeMnNi High Entropy Alloy Using DIHPB Tests and Electron Microscopy, Canadian Materials Science Conference (CMSC-2023), University of Manitoba, Winnipeg, MB, Canada
  2. M. Ghadiri*, S. Boakye-Yiadom, C. Jian (2023) Nanoscale Investigation On the Effect of Projectile Spinning During High-Velocity and Hyper-Velocity Impacts Canadian Society for Mechanical Engineering (CSME 2023) Sherbrooke, QC Canada, May 28-31, 2023.
  3. G. Tak*, S. Boakye-Yiadom (2023), Deformation Behavior and Microstructural Evolution of Al 7xxx High Strain Rate Compression, Canadian Materials Science Conference (CMSC-2023), Winnipeg, Manitoba, Canada, June 27-30, 2023.
  4. D. Mateos*, S. H. Duntu*, S. Boakye-Yiadom (2023), Adiabatic Shear Banding and Dynamic Tensile Fracture of Armour Steel, Canadian Materials Science Conference (CMSC-2023), Winnipeg, Manitoba, Canada, June 27-30, 2023.
  5. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2023) Influence of 0.5wt% Graphene Addition on Mechanical Performance of Alumina-Graphene Nanocomposite, Microscopy and Microanalysis 29: 753-755 (https://doi.org/10.1093/micmic/ozad067.372)
  6. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom (2023). Effect of Process Parameters on Part Quality, Microstructure, and Mechanical Properties of a WC-Co-Hexagonal Boron Nitride alloy Prepared by Laser Power Bed Fusion Process, Journal of Materials Engineering and Performance 1-17 (https://doi.org/10.1007/s11665-023-07976-5)
  7. D. Mateos*, S. Boakye-Yiadom (2023). Effect of Stress-State on Adiabatic Shear Banding in Al2024-T351 International Journal of Impact Engineering 178 (2023) 104602 (https://doi.org/10.1016/j.ijimpeng.2023.104602).
  8. F. Tetteh*, S. H. Duntu*, S. Boakye-Yiadom (2023) Susceptibility Of Adiabatic Shear Band Formation In AZ31B Magnesium Alloy During High Strain Rate Impact, The International Journal of Advanced Manufacturing Technology 128: 2161-2174 (https://doi.org/10.1007/s00170-023-12049-x)
  9. F. Tetteh*, S. H. Duntu*, J. Agyapong*, S. Boakye-Yiadom (2023) Influence of Precipitate Distributions On Adiabatic Shear Band Formation and Flow Behavior Of Heat-Treated 7050 Aluminum Alloy, The International Journal of Advanced Manufacturing Technology, 1-22 (https://doi.org/10.1007/s00170-023-11469-z).
  10. S. Duntu*, S. Boakye-Yiadom (2023) Microstructural Evolution of Adiabatic Shear Bands in 4340 Steel during High Temperature Impact, Materials Science and Engineering A, (Under Preparation).
  11. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom, (2023) An Outlook on The Progress of Selective Laser Melting of Equiatomic FeCoCrMnNi alloy, Additive Manufacturing, (Under Preparation).
  12. G. Tak*, S. Boakye-Yiadom (2023), Deformation Behavior and Microstructural Evolution of Armox 500T Under High Strain-Rate and High Temperature Compression, Materials and Design (Under Preparation).
  13. S. Duntu*, S. Boakye-Yiadom (2023), Effect of Printing Parameters on the Microstructural and Wear Properties of Additive Manufactured Alumina and Zirconia Ceramics, Ceramics International (Under Preparation).
  14. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2022), Mechanical Characterization of Hot-Pressed Alumina-Zirconia Hybrid Nanocomposites, Canadian Society for Mechanical Engineering (CSME 2022) Edmonton, AB Canada, June 5-8, 2022
  15. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2022), Wear and Mechanical Behavior of Hot-Pressed Alumina-based Hybrid Nanocomposites, Canadian Materials Science Conference (CMSC 2022) Toronto, ON Canada, June 22-24, 2022
  16. D. Mateos*, S. Boakye-Yiadom (2022) Effect of Stress-State on Adiabatic Shear Banding in Al2024-T351, Canadian Materials Science Conference (CMSC 2022) Toronto, ON Canada, June 22-24, 2022
  17. D. Mateos*, S. Boakye-Yiadom (2022) Strain-Rate Dependent Characterization of Al2024-T351 for GISSMO Parameterization, Canadian Society for Mechanical Engineering (CSME 2022) Edmonton, AB Canada, June 5-8, 2022
  18. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom, (2022) Assessing the Processability of CoCrFeMnNi Fabricated with Selective Laser Melting, Canadian Materials Science Conference (CSME 2022), University of Toronto, Toronto, ON, Canada
  19. N. Azgoomi*, F. Tetteh*, S. Boakye-Yiadom. (2022). Influence of Air Cooling and Aging on Microstructure and Wear Properties of 3D Printed and Conventionally Produced Medical-Grade Ti6Al4V ELI Alloy, Metallurgical and Materials Transaction A (2022) 1-16 (https://doi.org/10.1007/s11661-021-06577-y).
  20. A. Eliasu*, S. H. Duntu*, K. Hukpati*, M. Y. Amegadzie, J. Agyapong*, F. Tetteh*, A. Czekanski, S. Boakye-Yiadom (2022), Effect of Individual Printing Parameters on Residual Stress and Tribological Behaviour of 316L Stainless Steel Fabricated with Laser Powder Bed Fusion (L-PBF), The International Journal of Advanced Manufacturing Technology, vol 119, p. 7041-7061. (https://doi.org/10.1007/s00170-021-08489-y).
  21. S. Duntu, K. Hukpati, I. Ahmad, M. Islam and S. Boakye-Yiadom (2022) Deformation and fracture behaviour of alumina-zirconia multi-material nanocomposites reinforced with graphene and carbon nanotubes, Materials Science and Engineering A 835 (2022) 142655 (https://doi.org/10.1016/j.msea.2022.142655)
  22. J. Agyapong*, S. H. Duntu*, A. Czekanski, S. Boakye-Yiadom (2022). Microstructural Evolution and Properties of Cemented Carbides Alloyed with Hexagonal Boron Nitride (h-BN) using Selective Laser Melting, The International Journal of Advanced Manufacturing Technology, 122, 3647–3666 (https://doi.org/10.1007/s00170-022-10047-z)
  23. S. Duntu*, J. Agyapong*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2022). Combined Effect of Low ZrO2 Content and Carbon Nanostructures on Mechanical and Wear Properties of Hot-Pressed Al2O3/ZrO2 Hybrid Nanocomposites, Ceramics International, (https://doi.org/10.1016/j.ceramint.2022.08.069)
  24. K. Hukpati*, A. Eliasu, F. Tetteh, A Czekanski, S Boakye-Yiadom (2022). Effect Of Printing Parameters On The Structure And High Strain Rate Deformation Behavior Of Additively Manufactured 316L Stainless Steel, Materials Science and Engineering A 853: 1-24 (https://doi.org/10.1016/j.msea.2022.143710)
  25. K. Hukpati*, S. Boakye-Yiadom, A. Czekanski (2021) Effect of Printing Parameters on Mechanical Properties of AM 316L Stainless Steel Progress in Canadian Mechanical Engineering. Vol. 4, CSME 2021, Charlottetown, PEI, Canada, June 27 – 30, 2021.
  26. J. Agyapong*, S. Boakye-Yiadom, A. Czekanski (2021) Effect Of The Strength Of Individual Structures Of A 3D-Printed WC-Co Cemented Carbide On Its Bulk Mechanical Properties, Progress in Canadian Mechanical Engineering. Vol. 4, CSME 2021, Charlottetown, PEI, Canada, June 27 – 30, 2021.
  27. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom (2021) Microstructural Characterization of WC-Co-hBN Cemented Carbide Processed Using Selective Laser Sintering, Microscopy and Microanalysis 27 (S1): 2392-2394 (https://doi.org/10.1017/S1431927621008576)
  28. A. Eliasu*, A. Czekanski, S. Boakye-Yiadom. (2021). Effect of Direct Metal Laser Sintering (DMLS) Parameters on the Microstructural Evolution and Hardness of 316L Stainless Steel, International Journal of Advanced Manufacturing Technology :1-19 (https://doi.org/10.1007/s00170-021-06818-9)
  29. J. Agyapong*, A. Czekanski, S. Boakye –Yiadom. (2021). Effect of Heat Treatment on Microstructural Evolution and Properties of Cemented Carbides (WC-17Co) Reinforced with 3% Volume Hexagonal-Boron Nitride (h-BN) and Processed by Selective Laser Sintering (SLS), Materials Characterization 174: 110968 (https://doi.org/10.1016/j.matchar.2021.110968)
  30. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom. (2021). Synergistic Effect of Graphene and Carbon Nanotubes on the Wear Behavior of Alumina-Zirconia Nanocomposites, Materials Characterization 175 (2021) 111056 (https://doi.org/10.1016/j.matchar.2021.111056)
  31. N. Azgomi*, F. Tetteh*, S. Duntu*, S. Boakye-Yiadom (2021), Effect of Heat Treatment on the Microstructural Evolution and Properties of 3D Printed and Conventionally Produced Medical-Grade Ti6Al4V ELI Alloy, Metallurgical and Materials Transactions A, 52, 3382-3400 (https://doi.org/10.1007/s11661-021-06310-9)

  32. F. Tetteh*, S. Boakye-Yiadom (2020) microstructural deformation behavior and formation of adiabatic shear bands in AZ31 magnesium alloy during high strain rate impact, Materials Science and Engineering A, MSEA-D-19-03707.
  33. F. Tetteh*, S. Duntu*, A. L. Moter, S. Boakye-Yiadom (2020) Dynamic Deformation Mechanisms and In-situ Thermal Response of 7050 Aluminium Alloy at High Strain Rates, Proceedings of the Canadian Society for Mechanical Engineering International Congress 2020, Progress in Canadian Mechanical Engineering 3:1-5) (doi:10.32393/csme.2020.83)
  34. F. Tetteh*, S. Duntu*, S. Boakye-Yiadom (2020) Multiscale Evolution of Strain Localisation Mechanisms in AZ31B Magnesium and 7050 Aluminum Alloys at High Strain Rates, Microscopy and Microanalysis26: 1078–1080 (https://doi.org/10.1017/S1431927620016888).
  35. S. Duntu*, F. Tetteh*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2020) Microstructural and Mechanical Characterization of Alumina-Zirconia-Graphene Hybrid Nanocomposites, Microscopy and Microanalysis, p. 364-367 (https://doi.org/10.1017/S1431927620014397).
  36. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2020) Characterization of the Structure and Properties of Processed Alumina-Graphene and Alumina-Zirconia Composites, Ceramics International 47 (2021) 367-380 https://doi.org/10.1016/j.ceramint.2020.08.142

  37. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2019) Effect of graphene and zirconia on microstructure and tribological behaviour of alumina matrix nanocomposites, Wear (2019) 438-439: 203067, 1-19.

  38. D. Singh, S. Boakye-Yiadom, D. Cronin (2019) Comparison of porcine brain mechanical properties to potential tissue simulant materials in quasi-static/sinusoidal compression, Journal of Biomechanics 92:84 - 89.
  39. F. Tetteh*, S. Boakye-Yiadom (2019) Study of the formation of adiabatic shear bands in AZ31 Magnesium alloy during impact, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.
  40. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom (2019 Nanoindentation of WC-Co Cemented Carbide Fabricated by Selective Laser Sintering, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.
  41. A. Eliasu*, A. Czekanski, S. Boakye-Yiadom (2019) Effect of Printing Parameters on Porosity of DMLS AISI 316L Alloy, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.
  42. N. Azgoomi*, S. Boakye-Yiadom (2019) Effect of Heat Treatment on the Microstructural Evolution and Mechanism of Wear of 3D Printed Ti6Al4V Alloys, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.
  43. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2019) Wear resistance and fracture behaviour of alumina-zirconia hybrid nanocomposites, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.
  44. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2019) Effect of Graphene and Carbon nanotubes on Alumina-Zirconia hybrid nanocomposites, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.
  45. Tetteh*, S. Boakye-Yiadom (2019) Microstructural Evolution of Adiabatic Shear Bands in AZ31 Magnesium and 7050 Aluminum Alloys During High Strain Rate Impact, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.
  46. N. Azgoomi*, S. Boakye-Yiadom (2019) Microstructural Evolution During Heat Treatment and Mechanism of Wear of Conventional and 3D Printed Ti6Al4V Titanium Alloys, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.
  47. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom (2019) Microstructural Characterization of Heat Treated 3D Printed Cemented Carbide, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.
  48. A. Eliasu*, A. Czekanski, S. Boakye-Yiadom (2019) Effect of 3D Printing Parameters on Porosity and Microhardness of AISI 316L Fabricated by DMLS, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.
  49. S. Duntu*, S. Boakye-Yiadom (2019) Effect of Zirconia and Graphene on wear properties of alumina matrix nanocomposites, 22nd International Conference on Wear of Materials, Miami, Florida, USA, April 14-18, 2019.
  50. A. Eliasu*, S. Boakye-Yiadom (2019) Effect of High Temperature Impact on the Formation of Adiabatic Shear Bands, Microscopy and Microanalysis 25:2616-2617 (https://doi.org/10.1017/S1431927619013813).
  51. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2019) Effect of Graphene and Carbon Nanotubes on Wear Properties of Aluminum and Alumina Matrix Nanocomposites, Microscopy and Microanalysis,25: 2126-2127 (https://doi.org/10.1017/S143192761901136X).
  52. F. Tetteh*, S. Boakye-Yiadom (2019) Microstructural Evolution During Heat Treatment of 3D Printed Maraging Steel, Microscopy and Microanalysis25: 2576–2577 (https://doi.org/10.1017/S1431927619013618).
  53. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom (2019) Microstructural Characterization of WC-Co Cemented Carbide Processed Using Selective Laser Sintering, Microscopy and Microanalysis 25: 2604-2605. (https://doi.org/10.1017/S1431927619013758).
  54. D. Singh, S. Boakye-Yiadom, D. S. Cronin (2019) Comparison of Porcine Brain Mechanical Properties to Potential Tissue Simulant Materials in Quasi-static and Sinusoidal Compression, Journal of Biomechanics 92: 84 - 91 (https://doi.org/10.1016/j.jbiomech.2019.05.033).
  55. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2019) Effect of Graphene and Zirconia On Microstructure and Tribological Behaviour of Alumina Matrix Nanocomposites, Wear (2019) 438-439. (https://doi.org/10.1016/j.wear.2019.203067)

  56. S. Boakye-Yiadom, N. Bassim, (2018) Microstructural evolution of adiabatic shear bands in pure copper during impact at high strain rates, Materials Science and Engineering A (2018) 182-194.
  57. N. Azgoomi*, S. Boakye-Yiadom (2018). Effect of heat treatment on the wear behavior for Ti6Al4V, 30th Canadian Materials Science Conference, Alberta, ON-Canada.
  58. S. Duntu*, Olayinka Tehinse, S. Boakye-Yiadom(2018) Effect of Heat Treatment on the High Strain Rate Deformation Behavior of Al 7050 Aluminum Alloy, 30th Canadian Materials Science Conference, Alberta, ON-Canada.
  59. S. Boakye-Yiadom(2018) Mechanical Grain Refinement vs. Dynamic Recrystallization within Adiabatic Shear Bands in Steel and Copper during Impact, 30th Canadian Materials Science Conference, Alberta, Canada.
  60. S. Duntu*, S. Boakye-Yiadom(2018) Effect of Graphene, Carbon Nanotube and Zirconia on Alumina Matrix Nanocomposites, 30th Canadian Materials Science Conference, Alberta, ON-Canada.
  61. S. Boakye-Yiadom,N. Bassim, (2018) Microstructural Evolution of Adiabatic Shear Bands in Pure Copper during Impact at High Strain Rates, Materials Science and Engineering A (2018) 182-194. (https://doi.org/10.1016/j.msea.2017.11.027).

  62. S. Boakye-Yiadom, D. S. Cronin, (2017) On the importance of retaining stresses and strains in repositioning computational biomechanical models of the cervical spine, International Journal for Numerical Methods in Biomedical Engineering (2017), 2905: 1-19.
  63. S. Boakye-Yiadom, D. S. Cronin, (2017) On the Importance of Retaining Stresses and Strains in Repositioning Computational Biomechanical Models of the Cervical Spine, International Journal for Numerical Methods in Biomedical Engineering 1-19, (doi:10.1002/cnm.2905).
  64. S. Boakye-Yiadom, J. Barker, D. Cronin, (2016) Pre-position effect on the response and failure of a C4-C5 segment FE Model, Proceedings of the International Research Council of Biomechanics of Injury, Seoul-South Korea, IRC-A-16-26: 35-36.
  65. S. Boakye-Yiadom, D. Cronin, (2016) Repositioning study for a motion segment: effect of initial rotation, Proceedings of the International Research Council of Biomechanics of Injury, Malaga-Spain, IRC-16-78: 578-579.

  66. N. Bassim, S. Boakye-Yiadom, (2015) Study of the formation of adiabatic shear bands in steel during impact, Advances in Materials and Processing Technologies 1:19–26.
  67. N. Bassim, S. Boakye-Yiadom, G. Toussaint, M. Bolduc, (2015) Characterization of the dynamic behavior of ALGOTUF during impact and in torsion, Proceedings of the 11th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Lugano-Switzerland, 94:02005: 1-6. (http://dx.doi.org/10.1051/epjconf/20159402005).
  68. S. Boakye-Yiadom, N. Bassim, (2015) Mechanism of grain refinement and its effect on adiabatic shear bands in 4340 steel and pure copper during impact, Proceedings of the 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Lugano-Switzerland, 94:02001: 1-5. (http://dx.doi.org/10.1051/epjconf/20159402001).
  69. N. Bassim, S. Boakye-Yiadom, (2015) Study of the formation of adiabatic shear bands in steel during impact, Advances in Materials and Processing Technologies 1:19–26. (DOI: 10.1080/2374068X.2015.1111697).

  70. S. Boakye-Yiadom, A. K. Khan, N. Bassim, (2014) Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact. Materials Science and Engineering A 615:373–394.

  71. S. Boakye-Yiadom, A. K. Khan, N. Bassim, (2014) Deformation mapping and the role of carbides on the microstructure and properties of evolved ASBs. Metallurgical and Materials Transaction A 45:5379-5396.

  72. S. Boakye-Yiadom, A. K. Khan, N. Bassim, (2014) Systematic study of grain refinement during impact of 4340 steel. Materials Science and Engineering A 605:270–285.

  73. M. N. Bassim, S. Boakye-Yiadom, M. Bolduc, (2014) Microstructural evolution from shaped charge through steel plates. Applied Mechanics and Materials 566:344-349.
  74. N. Bassim, S. Boakye-Yiadom, M. Bolduc, (2014) Microstructural evolution from shaped charge through steel plates. Applied Mechanics and Materials 566:344-349. (DOI: 10.4028/www.scientific.net/AMM.566.344).
  75. S. Boakye-Yiadom, A. K. Khan, N. Bassim, (2014) Systematic study of grain refinement during impact of 4340 steel. Materials Science and Engineering A 605:270–285. (http://dx.doi.org/10.1016/j.msea.2014.03.066).
  76. S. Boakye-Yiadom, A. K. Khan, N. Bassim, (2014) Deformation mapping and the role of carbides on the microstructure and properties of evolved ASBs. Metallurgical and Materials Transaction A 45:5379-5396. (DOI: 10.1007/s11661-014-2495-7).
  77. S. Boakye-Yiadom, A. K. Khan, N. Bassim, (2014) Effect of microstructure on the nucleation and initiation of adiabatic shear bands (ASBs) during impact. Materials Science and Engineering A 615:373–394. (http://dx.doi.org/10.1016/j.msea.2014.07.095).
  78. S. Boakye-Yiadom, N. Bassim, (2013) Use of Focused Ion Beam (FIB) to study the impact properties of materials. Proceedings of the 6th Focused Ion Beam-Scanning Electron Microscopy Conference, Cambridge, MA-USA: 2-3.
  79. S. Boakye-Yiadom, N. Bassim, (2013) Microstructural mechanisms during impact and evolution of ASBs in steel, Proceedings of the 40th Annual Meeting of Microscopical Society of Canada, Victoria, BC-Canada: 95-96.
  80. S. Boakye-Yiadom, N. Bassim, (2013) Methodologies for the study of formation of ASBs during impact, Proceedings of the 16th International Conference on Advances in Materials and Processing Technologies, Taipei-Taiwan: 1-3.
  81. N. Bassim, S. Boakye-Yiadom, (2013) The role of dislocation structures in assessment of damage in metallic materials, Proceedings of the 19th International Symposium On Plasticity and Its Current Applications, Nassau-Bahamas, NEAT Press ISBN: 0-9659463-4-2: 109-111.
  82. S. Boakye-Yiadom, N. Bassim, A. K. Khan, (2013) Microscopical study of the formation of adiabatic shear bands in 4340 steel during dynamic loading. Philosophical Magazine 93:4544-4568. (DOI: 10.1080/14786435.2013.837587).
  83. S. Boakye-Yiadom, N. Bassim, (2012) Impact behavior of 4340 steel at high strain rates and large strains, Proceedings of the Manitoba Materials Conference, Winnipeg, MB-Canada: 1-2.
  84. S. Boakye-Yiadom, M. N. Bassim, S. Al-Ameeri, (2012) On the persistence of adiabatic shear bands, Proceedings of the 10th International Conference on Mechanical and Physical Behavior of Materials under Dynamic Loading, Freiburg-Germany, 26:02002: 1-4. (http://dx.doi.org/10.1051/epjconf/20122602002).
  85. S. Boakye-Yiadom, M. N. Bassim, (2012) Effect of heat treatment on stability of impact-induced adiabatic shear bands in 4340 steel. Materials Science and Engineering A 546:223-232. (http://dx.doi.org/10.1016/j.msea.2012.03.057).
  86. S. Boakye-Yiadom, M. N. Bassim, (2011) Effect of prior heat treatment on dynamic impact behavior of 4340 steel and formation of ASBs. Materials Science and Engineering A 528:8700-8708. (http://dx.doi.org/10.1016/j.msea.2011.08.036).
  1. S. Duntu*, S. Boakye-Yiadom (2024), Effect of Printing Parameters on the Microstructural and Wear Properties of Additive Manufactured Alumina and Zirconia Ceramics, Ceramics International.
  2. T. Tenio*, S. Boakye-Yiadom (2024) Mechanical Characterization of Brain and Skull Tissue Simulant Materials for the Development of a Biofidelic Head Model, Journal of Biomedical Behavior of Materials.
  3. A. Eliasu*, A. Czekanski, S. Boakye-Yiadom (2023) In-Situ Process Monitoring And Defect Detection Techniques Of Laser Powder Bed Fusion: A Review, The International Journal of Advanced Manufacturing Technology.
  4. D. Mateos*, S. H. Duntu*, S. Boakye-Yiadom (2023) High Strain-Rate Characterization with Lode Angle Dependent Adiabatic Shear Band Initiation Criteria, International Journal of Impact Engineering.
  5. D. Mateos*, N. Nicholls, S. Boakye-Yiadom (2023) Optical Measurements in High Strain Rate Tensile Hopkinson Pressure Bar Tests, Journal of Dynamic Behavior of Materials.
  6. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom, (2023) Enhancing the mechanical strength of CoCrFeMnNi using the combined effect of SLM and Deep-Cryogenic treatment, Materials and Design.
  7. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom, (2023) Mechanical Behavior and Microstructural Evolution of an SLMed CoCrFeMnNi alloy under High Strain Rate Deformation and Post-Processing Techniques, Materials Characterization.
  8. J. Agyapong*, D. Mateos*, S. Boakye-Yiadom, A. Czekanski, (2023) Fracture Behaviour of CoCrFeMnNi Processed with Selective Laser Melting: Influence of Printing Parameters and Microstructure, Materials Science and Engineering A.

  9. Tetteh F*, Duntu S*, Motor A, Boakye-Yiadom S. (2020). Deformation Behavior and Microstructural Evolution of 7050 Aluminum Alloy during high strain rate loading, Materials Research Society Advances. (MRSAdv-2020-0012).

  10. Duntu S*, Tetteh F*, Agyapong J*, Solis D, Ahmad I, Islam M, Boakye-Yiadom S. (2020). Influence of Graphene addition on Microstructure and Mechanical Properties of Alumina-Graphene Nanocomposite, Materials Research Society Advances. (MRSAdv-2020-3320255).

  11. Duntu S*, Ahmad I, Islam M, Boakye-Yiadom S. (2020). Synergistic Effect of Graphene, Carbon Nanotubes on the Wear Behavior of Alumina-Zirconia Hybrid Nanocomposites, Wear. (Wear-2020-531).

  12. Tetteh F*, Nemcko M, Bakye-Yiadom S. (2020). In-Situ Characterization of Dynamic Mechanical Response and Evolution Of Adiabatic Shear Band In AZ31B At High Strain Rate Impact Via 3D-Digital Image Correlation, International Journal of Impact Engineering.

  13. Duntu S*, Ahmad I, Islam M, Boakye-Yiadom S. (2019). Characterization of the Structure and Properties of Alumina-Graphene and Alumina-Zirconia Nanocomposites, Ceramics International. (CERI-D-19-12641).

  14. Eliasu A*, Czekanski A, Boakye-Yiadom S. (2019). Effect of Direct Metal Laser Sintering (DMLS) Parameters on the Microstructural Evolution and Mechanical Properties of 316L Stainless Steel, Journal of Manufacturing Processes. (SMEJMP-D-19-02131).

  15. Tetteh F*, Agyapong J*, Duntu S*, Eliasu A*, Czekanski A, Boakye-Yiadom S. (2019). Microstructural Evolution During Heat Treatment of 18 wt.% Ni Maraging 300 Steel Processed Using Direct Metal Laser Sintering (DMLS), Metallurgical and Materials Transactions A. (E-TP-19-1674-A).

  16. Tetteh F*, Boakye-Yiadom S. (2019). Microstructural Evolution of Adiabatic Shear Bands in AISI 4340 Steel during High Temperature Impact, Journal of Materials Science and Technology. (JMST-2019-2927).

  17. Azgoomi N*, Tetteh F*, Boakye-Yiadom S. (2019). Effect of Heat Treatment on the Microstructural Evolution and Properties of 3D Printed and Conventional Ti6Al4V Medical Grade Titanium Alloy, Metallurgical and Materials Transaction A. (ETP- 20-80-A).

  18. Agyapong J*, Czekanski A, Boakye –Yiadom S. (2019). Effect of Heat Treatment on Microstructural Evolution and Properties of Boron-Nitride Tungsten-carbide Cobalt (WC-Co-hBN) Processed by Selective Laser Sintering, Journal of Materials Science & Technology. (JMST-2019-3538).
  1. S. Boakye-Yiadom-(Featured), Most UP Express train cars 'condemned' after thermal cracks found in brake discs: union, CTV News (02/2023)
  2. S. Boakye-Yiadom-(Featured), Newsletter for the NSERC Alliance Grant (No. ALLRP 560447 – 20) Issues I and II, NSERRC Alliance Newsletter (10/2022)
  3. S. Boakye-Yiadom (Cast), This is Lassonde Podcast Season 2: Black Youth and the CBSN (08/2022)
  4. S. Boakye-Yiadom-(Cast), Colossal Machines Season 2 (National Geographic): 4 Episodes on Crush Smash Shred, Next Gen Power, Titan Transports, Fire and Rescue (05/2022)
  5. S. Boakye-Yiadom (2022). Organized Collaborations between Black Faculty Members at York and Parents Engaged in Education - Canada's First Education Bank, Toronto, Canada.
  6. S. Boakye-Yiadom (2022). FULL STE(A)M AHEAD – Inclusive, Innovative & Interactive Teaching and Learning about STEM (science, technology, engineering and mathematics), Kindergarten-To-Industry (k2i) Academy and the Ontario Teacher’s Federation (OTF), Toronto, Canada.
  7. S. Boakye-Yiadom (2022). Transforming Learners to Transform Our World: Equity, Diversity, and Inclusion in STEM-Creating Disruptive Change, Kindergarten-To-Industry (k2i) Academy, Canadian Engineering Education Association Conference, Toronto, Canada.
  8. S. Boakye-Yiadom (2022). My Journey as a Black Scientist, Engineer and Professor, Canadian Black Scientists Network (CBSN) BE-STEMM 2022, Toronto, Canada.
  9. S. Boakye-Yiadom (2022). STEM and Black Wellness in Canada, The Harriet Tubman Institute, Toronto, Canada.
  10. S. Boakye-Yiadom (2022). Coding for Future Readiness, Catholic District School Board of Eastern Ontario (CDSBEO), Kemptville, Ontario, Canada
  11. S. Boakye-Yiadom-(Cast), Colossal Machines Season 1 (National Geographic): 6 Episodes on Astronomical Engineering, Sea Monsters, There Be Dragons, Sub-Zero Supermachines, Earth Biters, Mammoth Manufacturing (05/2021)
  12. S. Boakye-Yiadom (2020). Engineering Design for Environmental Sustainability, CISInternational University Fair (Virtual)

  13. D Singh, S Boakye-Yiadom, D. S. Cronin (2019) Comparison of Porcine Brain Tissue with Potential Surrogate Materials Under Quasi-Static Compression and Dynamic Mechanical Analysis, Challenges in Mechanics of Time-Dependent Materials, Part of the Conference Proceedings of the Society for Experimental Mechanics Series book series (CPSEMS), Volume 2 pp 57-59 Publisher Springer, Cham.

  14. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom (2019) Microstructural Characterization of WC-Co Cemented Carbide Processed Using Selective Laser Sintering, Microscopy and Microanalysis 25(S2): 2604-2605.

  15. F. Tetteh*, S. Boakye-Yiadom (2019) Microstructural Evolution During Heat Treatment of 3D Printed Maraging Steel, Microscopy and Microanalysis 25(S2): 2576–2577.

  16. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2019) Effect of Graphene and Carbon Nanotubes on Wear Properties of Aluminum and Alumina Matrix Nanocomposites, Microscopy and Microanalysis, 25(S2): 2126-2127.

  17. A.Eliasu*, S. Boakye-Yiadom (2019) Effect of High Temperature Impact on the Formation of Adiabatic Shear Bands,Microscopy and Microanalysis 25(S2):2616-2617.

  18. A.Eliasu*, A. Czekanski, S. Boakye-Yiadom (2019) Effect of 3D Printing Parameters on Porosity and Microhardness of AISI 316L Fabricated by DMLS, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.

  19. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom (2019) Microstructural Characterization of Heat Treated 3D Printed Cemented Carbide, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.

  20. N. Azgoomi*, S. Boakye-Yiadom (2019) Microstructural Evolution During Heat Treatment and Mechanism of Wear of Conventional and 3D Printed Ti6Al4V Titanium Alloys, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.

  21. F. Tetteh*, S. Boakye-Yiadom (2019) Microstructural Evolution of Adiabatic Shear Bands in AZ31 Magnesium and 7050 Aluminum Alloys During High Strain Rate Impact, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.

  22. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2019) Effect of Graphene and Carbon nanotubes on Alumina-Zirconia hybrid nanocomposites, Canadian Materials Science Conference (CMSC 2019), Vancouver, BC Canada, June 10-13, 2019.

  23. S. Duntu*, I. Ahmad, M. Islam, S. Boakye-Yiadom (2019) Wear resistance and fracture behaviour of alumina-zirconia hybrid nanocomposites, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.

  24. N. Azgoomi*, S. Boakye-Yiadom (2019) Effect of Heat Treatment on the Microstructural Evolution and Mechanism of Wear of 3D Printed Ti6Al4V Alloys, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.

  25. A.Eliasu*, A. Czekanski, S. Boakye-Yiadom (2019) Effect of Printing Parameters on Porosity of DMLS AISI 316L  Alloy, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.

  26. J. Agyapong*, A. Czekanski, S. Boakye-Yiadom (2019 Nanoindentation of WC-Co Cemented Carbide Fabricated by Selective Laser Sintering, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.

  27. F. Tetteh*, S. Boakye-Yiadom (2019) Study of the formation of adiabatic shear bands in AZ31 Magnesium alloy during impact, Canadian Society for Mechanical Engineering International Congress Conference (CSME2019), London, ON, Canada, June 3 – 5, 2019.

  28. S. Boakye-Yiadom (2018) Mechanical Grain Refinement vs. Dynamic Recrystallization within Adiabatic Shear Bands in Steel and Copper during Impact, 30th Canadian Materials Science Conference, Alberta, Canada.

  29. S. Duntu*, S. Boakye-Yiadom (2018) Effect of Heat Treatment on the High Strain Rate Deformation Behavior of Al 7050 Aluminum Alloy, 30th Canadian Materials Science Conference, Alberta, ON-Canada.

  30. N. Azgoomi*, S. Boakye-Yiadom (2018). Effect of heat treatment on the wear behavior for Ti6Al4V, 30th Canadian Materials Science Conference, Alberta, ON-Canada.
  31. S. Boakye-Yiadom, C. Torres-Machi , K. Guo. (2017). Academic Job Opportunities. Landing An Academic Job 2017, University of Waterloo, Waterloo, Canada.
  32. S. Boakye-Yiadom, D. Cronin, F. Khor, D. Shen, D. Gierczycka, B. Pilarczyk, N. Evans, D. Singh, J. Barker. (2017). Advanced Human Neck Models with Active Musculature for Enhanced Vehicle Safety: The Need For Re-positioning. NSERC Collaborative Research Technical Presentation, Windsor, Canada
  33. S. Boakye-Yiadom, (2017). My Journey of Research into Materials Science and Impact Biomechanics. 2017 Undergraduate Research Conference, York University, Toronto, Canada.

  34. S. Boakye-Yiadom, D. Cronin, (2016) Repositioning study for a motion segment: effect of initial rotation, Proceedings of the International Research Council of Biomechanics of Injury, Malaga-Spain, IRC-16-78: 578-579.

  35. S. Boakye-Yiadom, J. Barker, D. Cronin, (2016) Pre-position effect on the response and failure of a C4-C5 segment FE Model, Proceedings of the International Research Council of Biomechanics of Injury, Seoul-South Korea, IRC-A-16-26: 35-36.

  36. S. Boakye-Yiadom, N. Bassim, (2015) Mechanism of grain refinement and its effect on adiabatic shear bands in 4340 steel and pure copper during impact, Proceedings of the 11th International Conference on Mechanical/Physical Behaviour of Materials under Dynamic Loading, Lugano-Switzerland, 94:02001: 1-5.
  37. N. Bassim, S. Boakye-Yiadom, G. Toussaint, M. Bolduc, (2015) Characterization of the dynamic behavior of ALGOTUF during impact and in torsion, Proceedings of the 11th International Conference on Mechanical and Physical Behaviour of Materials under Dynamic Loading, Lugano-Switzerland, 94:02005: 1-6.
  38. S. Boakye-Yiadom, N. Bassim, I. Polyzois. (2013). Study of Shock and Impulsive Loading to Improve Dynamic Computer Codes Failure Models. Defence Research and Development Canada (Valcartier) Technical Presentation, Quebec City, Canada